Menu Bar - Christie LW555 User Manual

Basic Operation
For detailed functions of each menu, see "Menu Tree" on pages 76-78.
Main Menu
1
2
3
4
5
6
7
8
9
1 Input
Used to select an input source (Input 1, Input 2, Input 3 or Network) (p.33).
Note: Network will be not displayed when optional Network unit is not attached.
2 PC adjust
Used to adjust the parameters to match with the input signal format (pp.37-39).
3 Image select
For computer source, used to select an image level among Dynamic, Standard, Real, and Image 1-10 (p.40).
For Video source, used to select an image level among Dynamic, Standard, Natural, Cinema, and Image 1-10 (p.46).
4 Image adjust
For computer source, used to adjust the computer image. [Contrast/Brightness/Color temp./White balance (R/G/B)/
Offset(R/G/B)/Sharpness/Gamma/Reset/Store] (pp.41-42).
For video or HDMI source, used to adjust the video image. [Contrast/Brightness/Color/Tint/Color temp./White
balance (R/G/B)/Offset (R/G/B)/Sharpness/Gamma/Noise Reduction/Progressive/Reset/Store] (pp.47-48).
5 Screen
For computer source, used to adjust the size of the image. [Normal/Full/Wide(16:9)/Zoom/True/Custom/Custom adj./
Digital zoom +/-/Keystone/Ceiling/Rear/Screen aspect/Reset] (pp.42-44).
For video or HDMI source, used to adjust the size of the image. [Normal/Full/Wide(16:9)/Zoom/Natural Wide/Custom/
Custom adj./Keystone/Ceiling/Rear/Screen aspect/Reset] (pp. 49-50).
6 Sound
Used to adjust the volume or mute the sound (p.28).
7 Setting
Used to set the projector's operating configurations (pp.51-65).
8 Information
Display the input source information: Input, H-sync freq., V-sync freq., Screen, Language, Lamp status, Lamp counter,
Filter counter, Power management, Key lock, PIN code lock, Shutter management, Simple mode, Remote control,
and SERIAL NO. (p.29).
9 Network
See the owner's manual of "Network Set-up and Operation".
Guide
The key operation is displayed.
26

Menu Bar

Sub-Menu
LW555 User Manual
020-000249-01 Rev.1 (05-2010)