Comtech EF Data CMR-5975 Installation And Operation Manual page 58

Digicast Media Router S2 Receiver CMR-5975 (MR-S2)
Device Management via User Interfaces
Contact information of the system administrator for support.
System Location
The physical location where the unit has been installed.
SNMP IP Address
Defines the SNMP server where traps are sent.
SNMP R/W Community
The community name for authentication for read/write access to the private MIB.
SNMP R/O Community
The community name for authentication for read only access to the private MIB.
Enable Telnet
Enables Telnet application on the MR-S2.
Display Config
Outputs the overall configuration of the receiver (verbose).
Download Image
Allows software/firmware changes to be made. User name and password is required for security.
Reset Unit
Reboots the receiver.
Load Factory Defaults
Resets all settings (except network) to factory default settings.
4-30
Revision 3
MN-CMR5975-IOM