Digicast Media Router S2 Receiver CMR-5975 (MR-S2)
Device Management via User Interfaces
Default Gateway
The Default Gateway assigned to the MR-S2's LAN interface. The Default Gateway is entered in
dotted decimal format and must be within the subnet of the IP Address assigned to the LAN
interface. The Default Gateway is the address of a local router to which all non-local subnet
traffic will be directed.
Link Configuration
Select the line speed and duplex setting on the receiver's LAN interface.
The available options are:
•
Auto – the port will auto-negotiate the configuration of the port
•
10 Mb / half duplex
•
10 Mb / full duplex
•
100 Mb / half duplex
•
100 Mb / full duplex
If the configuration of the port is unknown, then "Auto" is the recommended configuration.
4-11
Revision 3
MN-CMR5975-IOM
Need help?
Do you have a question about the CMR-5975 and is the answer not in the manual?
Questions and answers