Comtech EF Data CMR-5975 Installation And Operation Manual page 33

Digicast Media Router S2 Receiver CMR-5975 (MR-S2)
Device Management via User Interfaces
The MR-S2 Administrative Configuration page contains the following configurable, required
parameters:
User Name
The MR-S2's User Name is user configurable and is used for connecting to the unit via IP
management services and terminal services.
The default user name is "
Password
The Password is used for authenticating a user when connecting via IP management services.
The default password is
The password is case sensitive and must be entered carefully.
When the password is changed, enter the password twice for verification.
System Contact
Enter the contact information of the system administrator for support.
System Location
Enter the physical location where the unit has been installed.
Enable Telnet
Use the checkbox to Enable or Disable Telnet application on the MR-S2.
Update Firmware
These fields are provided to allow for software/firmware changes.
.
comtech"
.
"comtech"
4-5
Revision 3
MN-CMR5975-IOM