Setting Up The 819-Gprs Using Native Windows Drivers; Configuring The Modem; Creating A Dial-Up Networking (Dun) Connection - CalAmp 819-GPRS series User Manual

Setting up the 819-GPRS using native Windows drivers:

1. Click on Start --> Settings --> Control Panel. Select "Phone and Modem Options".
2. Select the "Modem" tab. Select "Add..." and follow the Wizard. Check "Don't Detect My Modem".
3. Select "Standard 19200 bps Modem." Click "Next".
4. Assign the modem to the COM port connected to the modem. Click "Next".
5. Click "Finish".

Configuring the Modem

1. Click on Start --> Settings --> Control Panel. Select "Phone and Modem Options".
2. Click "New" or "Edit" to add or modify a location name.
3. In "Location Name", enter a name to distinguish this connection as the 819-GPRS modem. Type
your area code in the Area Code box.
4. Click "Apply" and "OK". The window should exit out to the Phone and Modem Options box.
5. Click the tab at the top titled "Modems". Select the "MC75 Modem (GPRS)" (or the "Standard
19200 bps Modem" if you're using the driver from the website) and click "Properties".
6. Click the "Modem" tab at the top of this new box. The box titled "Maximum Port Speed" should
read: 115200. If not, scroll down to select 115200. Click "OK". Click "Apply".
7. Click "OK".

Creating a Dial-Up Networking (DUN) connection

1. Click on Start --> Settings --> Control Panel. Select "Network Connections".
001-0003-829 Revision 1
Page 14 of 65