Software Configuration; Removing The Ufm; Required Tools - Fujitsu PRIMERGY BX924 S3 Upgrade And Maintenance Manual

Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task, re-enable BitLocker as described in section
BitLocker functionality" on page

10.2.1.5 Software configuration

The UFM delivery set includes the "Recovery Tool CD" to setup the ESXi
configuration. Proceed as follows:
Ê Switch on the server blade.
Ê Right after switching on the server, insert the "Recovery Tool CD" into the
DVD drive and close the drive tray.
Ê The server should now boot from the "Recovery Tool CD".
Ê Follow the on-screen instructions.

10.2.2 Removing the UFM

Field Replaceable Units (FRU)
Average hardware task duration: 5 minutes
Average software task duration: 5 minutes

10.2.2.1 Required tools

Preliminary and concluding steps: tool-less
●
Removing the UFM:
●
– Phillips PH0 / (+) No. 0 screw driver
BX924 S3
99.
Upgrade and Maintenance Manual
System board components
"Enabling
243