Resetting The Boot Retry Counter - Fujitsu PRIMERGY BX924 S3 Upgrade And Maintenance Manual

5.2.7.2

Resetting the boot retry counter

The boot retry counter should be reset to its original value concluding every
service task.
I
Please note, if the customer does not know about the original boot
retry values:
If the system boots up and no further errors occur within 6 hours after that
successful boot attempt, the boot retry counter will automatically be reset
to its default value. Please take into account, that the specified number
of boot attempts can only be determined after this period of time.
If the customer knows about the original boot retry values, proceed as follows
to reset or configure the boot retry counter:
Resetting the boot retry counter in the managment blade web interface
Ê Enter the management blade web interface.
Ê Open the Components – System – Server Blades – Server Blade-x menu for the
desired server blade.
Ê Select the Configuration tab and scroll to the ASR box.
Ê Under Retry Counter 0-max. specify the maximum number of boot attempts
(0 to 7).
BX924 S3
Upgrade and Maintenance Manual
Basic software procedures
91