Processors
9.5
Handling processor heat sinks
Field Replaceable Units (FRU)
Average task duration: 15 minutes
9.5.1
Required tools
Preliminary and concluding steps: tool-less
●
Installing or removing the processor heat sink:
●
– Phillips PH2 / (+) No. 2 screw driver
9.5.2
Preliminary steps
Before installing, removing or replacing the processor heat sink, perform the
following steps:
Ê Shut down the server blade as described in section
server blade" on page
Ê Remove the server blade from the system unit as described in section
"Removing the server blade from the system unit" on page
Ê Open the server blade as described in section
on page
60.
Ê If necessary, remove the memory as described in section
memory module" on page
218
54.
173.
Upgrade and Maintenance Manual
"Shutting down the
59.
"Opening the server blade"
"Removing a
BX924 S3