Subscribe to Our Youtube Channel
Related Manuals for Rose electronics PS/2
Summary of Contents for Rose electronics PS/2
- Page 1 ™ CrystalView DVI CATx DIGITAL CATx KVM EXTENDER INSTALLATION AND OPERATIONS MANUAL 10707 Stancliff Road Phone: (281) 933-7673 Houston, Texas 77099 WWW.ROSE.COM...
- Page 4 LIMITED WARRANTY Rose Electronics warrants the CrystalView DVI CATx to be in good working order for one year from the date of purchase from Rose Electronics or an authorized dealer. Should this product fail to be in good working order at any time during this one-year warranty period, Rose Electronics will, at its option, repair or replace the Unit as set forth below.
- Page 5 FCC/IC STATEMENTS, EU DECLARATION OF CONFORMITY FEDERAL COMMUNICATIONS COMMISSION AND INDUSTRY CANADA RADIO-FREQUENCY INTERFERENCE STATEMENTS This equipment generates, uses and can radiate radio frequency energy and if not installed and used properly, that is in strict accordance with the manufacturer’s instructions may cause interference to radio communication. It has been tested and found to comply with the limits for a Class B digital device in accordance with the specifications of Part 15 of FCC rules, which are designed to provide reasonable protection against such interference when...
-
Page 6: Table Of Contents
TABLE of CONTENTS Contents Disclaimer ......................1 System introduction ..................1 Features ......................2 Compatibility ..................... 2 Package contents ..................... 2 Models (Single Video) ..................3 Models (Dual Video) ..................4 Cables ....................... 5 Installation ......................6 Applying power .................... 8 Operating instructions –... -
Page 7: Disclaimer
System introduction Thank you for choosing the Rose Electronics CrystalView DVI CATx KVM station extender. The CrystalView DVI CATx is a very versatile CATx KVM extender. It supports the latest digital DVI video. All combinations of DVI monitors and video cards are supported. -
Page 8: Features
The transmitter and receiver Units Power adapter for transmitter and receiver units. Transmitter to computer cable (DVI – PS/2 – PS/2 to DVI) “Y” cable (1-PS/2 to 2-PS/2) Installation and operations manual. CPU adapter cables, CATX cables, and DVI to VGA converters are usually ordered separately. -
Page 9: Models (Single Video)
MODELS Models (Single Video) PS/2 Transmitter PS/2 Receiver USB Transmitter USB Receiver PS/2 Transmitter w/Serial/Audio PS/2 Receiver w/Serial/Audio USB Transmitter w/Serial/Audio USB Receiver w/Serial/Audio Receiver / Transmitter – All Single Video models CRYSTALVIEW DVI CATx INSTALLATION AND OPERATIONS MANUAL... -
Page 10: Models (Dual Video)
Models (Dual Video) PS/2 Transmitter PS/2 Receiver USB Transmitter USB Receiver PS/2 Transmitter w/Serial/Audio PS/2 Receiver w/Serial/Audio USB Transmitter w/Serial/Audio USB Receiver w/Serial/Audio Receiver / Transmitter – All Dual Video models CRYSTALVIEW DVI CATx INSTALLATION AND OPERATIONS MANUAL... -
Page 11: Cables
DVI to 3.5mm stereo cable. Stereo speakers and a microphone connect directly to the receivers audio input/output ports. CrystalView DVI CATx to PC cable (PS/2 or USB connectors) CRYSTALVIEW DVI CATx INSTALLATION AND OPERATIONS MANUAL... -
Page 12: Installation
INSTALLATION Installation Please refer to the safety section first before proceeding with any installation or configuration of the CrystalView DVI CATX. When installing the CrystalView DVI CATX, locate the transmitter as close as possible to the CPU or switch. Keep the cables as short as possible but still give some freedom of movement. -
Page 13: Table 1.Transmitter To Receiver Cabling
To 1 Local K/M Graphic card local monitor Graphic card local monitor CPU K/M Transmitter – USB / Dual video Transmitter – PS/2 / Dual video Serial / Audio Serial / Audio Transmitter to Receiver cabling Cable type Maximum distance... -
Page 14: Applying Power
INSTALLATION Applying power With all cable connections made, plug in the provided power adapters to a 110/220-volt source and to the power connector on the transmitter and receiver Unit. Only use the power adapter provided. The red LED next to the power connector indicates power is applied to the unit. -
Page 16: Led Indicators
LED Indicators POWER DATA ERROR STATUS VIDEO OK Power (Red) Off – No power applied, device not ready On- Power applied, device ready Data Error (Green) • Off - No errors, device ready • Blinking / On – Transmitter / Receiver communication not established, cable to long, attenuation to high excess EMI interference Link Status (Green) •... -
Page 17: Operating Instructions - Local Kvm Access
OPERATION Operating instructions – Local KVM access Operation of your computer is no different than having your keyboard, monitor, and mouse connected directly to the computer. All functions, applications, upgrades and other items can be done normally. The only difference is the computer can be up to 450 feet away. CrystalView DVI CATx with local KVM access allows an additional KVM station to be connected to the transmitter. - Page 18 C- Locate jumpers JP1 and JP2. D- Place a jumper block on the appropriate jumpers as shown in the table below: DDC Source JP1 setting JP2 setting From internal table (default) From local monitor From remote monitor (see procedure) Reset to default values Load DDC information from the Remote monitor and save to the internal DDC table To load the DDC information from the remote monitor, perform the following...
-
Page 19: Reset Ddc Table To Default Values
Reset DDC table to default values To reset the DDC information to the factory default values, perform the following steps: 1. Remove power from the Local unit and remove the cover 2. Remove jumper JP1 (see internal PC board figure) (JP1 and JP2 open) 3. -
Page 20: Troubleshooting
Wrong cable plugged in, keyboard and mouse cables reversed. • Try a different model of mouse The system does not detect a PS/2 mouse, or the application cannot find the mouse. • Ensure that the Local Unit is connected to the PC keyboard port to... - Page 21 This Unit does not contain any internal user-serviceable parts. In the event a Unit needs repair or maintenance, you must first obtain a Return Authorization (RA) number from Rose Electronics or an authorized repair center. This Return Authorization number must appear on the outside of the shipping container.
- Page 22 SAFETY Safety The CrystalView DVI CATx KVM extender has been tested for conformance to safety regulations and requirements, and has been certified for international use. Like all electronic equipment, the CrystalView DVI CATx should be used with care. To protect yourself from possible injury and to minimize the risk of damage to the Unit, read and follow these safety instructions.
- Page 23 Safety and EMC Regulatory Statements Safety information Documentation reference symbol. If the product is marked with this symbol, refer to the product documentation to get more information about the product. WARNING A WARNING in the manual denotes a hazard that can cause injury or death.
-
Page 24: Appendices
90-240 VAC adapter to 5VDC / app. 10W power Receiver 90-240 VAC adapter to 5VDC / app. 10w power Connectors Video to PC – DVI-I Video to KVM – DVI-I Keyboard: PS/2 or USB Mouse: PS/2 or USB Interconnect: RJ45 ο ο ο ο Temp/Humidity... -
Page 25: Appendix B. Parts And Cables
Appendix B. Parts and cables Part Number Description CRV-DLDTXPD1D DVI-D / PS/2 Single video (Transmitter) CRV-SRDTXPD1D DVI-D / PS/2 Single video (Receiver) CRV-DLDTXPD2D DVI-D / PS/2 Dual video (Transmitter) CRV-SRDTXPD2D DVI-D / PS/2 Dual video (Receiver) CRV-DLDTXUD1D DVI-D / USB Single video (Transmitter) - Page 26 NOTES CRYSTALVIEW DVI CATx INSTALLATION AND OPERATIONS MANUAL...
- Page 28 10707 Stancliff Road Phone: (281) 933-7673 Houston, Texas 77099 WWW.ROSE.COM...
Need help?
Do you have a question about the PS/2 and is the answer not in the manual?
Questions and answers