Security > Policies > Services - Dell PowerConnect W-AirWave 7.6 Configuration Manual

Field
Name
Rules
Invert
IPv6
Select Add to complete the configuration of the Destination policy profile, or click Save to complete the editing of
an existing profile. The new destination appears on the Security > Policies > Destinations page.
Security > Policies > Services
The Security > Policies > Services page displays all Netservice profiles that are available for reference by Security
policies. This page displays Netservice profile names, the protocol associated with it, the policy that uses this
Netservice profile, and the folder.
Select Add to create a new Netservice profile, or click the pencil icon next to an existing Netservice profile to edit it.
The Security > Policies > Services page contains the following fields, as described in
Table 14:
Security > Policies > Services Fields and Descriptions
Field
General Settings
Folder
Name
Other Settings
Protocol
Port Selection
TCP/UDP Port
TCP/UDP Max Port
54 | Configuration Reference
Default Description
Blank Enter the name of the destination.
Use this field to invert the destination from one end of the VPN
No
connection to the other.
Select this button to create a new rule for this destination profile.
Clicking this button displays the Net Destination Rule section for the
selected protocol, which is comprised of two settings:
No
Rule Type—Specify whether the rule applies to Host, Network, or
l
Range.
IP Address—Enter the IP address for the net destination rule.
l
Default Description
Set the folder with which the security policy service is associated. The drop-
Top
down menu displays all folders available for association with the service.
Blank Enter the name of the destination.
Specify the protocol that is to support the security policy service being
configured. The service options are:
TCP
l
TCP UDP
l
IP
l
The remaining fields on this page change according to which protocol you have
selected.
Choose whether to list ports by Range (which causes the Port and Max Port fields
Range to appear below) or List (which introduces a Port List field and requires a
minimum version of 6.0.0.0).
Appears if Range is specified in Port Selection. Specify the TCP/UDP port or
range of ports to support the service being configured.
Appears if Range is specified in Port Selection. Specify the highest port that will
Table 14:
Dell PowerConnect W-AirWave 7.6 | Configuration Guide