Dell PowerConnect W-AirWave 7.6 Configuration Manual page 22

Most profiles in AirWave are similar to the All Profiles display in the Dell PowerConnect W-Series controller
WebUI. The primary difference in AirWave is that AAA and SSID profiles are not listed under the WLAN
column, but under Profiles.
d. Save changes to each element as you proceed through profile and WLAN configuration.
All other settings supported on Dell PowerConnect W-Series controllers can be defined on the Dell
PowerConnect W Configuration page. The following section in this document provides additional information
about configuring profiles:
"General Profiles Guidelines" on page 20
10. Provision multiple Dell PowerConnect W AP Groups on one or more controllers by putting the controllers into
an AirWave group and configuring that group to use the selected Dell PowerConnect W AP Groups. With global
configuration enabled, configure such Dell PowerConnect W AP Groups settings on the Group > Dell
PowerConnect W Config page. With group configuration, use the Dell PowerConnect W AP Groups. The
following section of this document provides additional information:
"Dell PowerConnect W AP Groups Procedures and Guidelines" on page 19
11. As required, add or edit AP devices. The following section of this document has additional information:
"Selecting Dell PowerConnect W AP Groups" on page 20
12. Each AP can be assigned to a single Dell PowerConnect W AP Group. Make sure to choose an AP Group that
has been configured on that controller using that controller's AirWave Group. Use the APs/Devices > List,
Modify Devices field and the APs/Devices > Manage page. You can create or edit settings such as the AP name,
syslocation, and syscontact on the APs/Devices > Manage page. For additional information, refer to
APs with Dell PowerConnect W Configuration" on page
Figure 17:
APs/Devices > Manage Page Illustration (Partial Display)
13. Navigate to the APs/Devices > Audit page for the controller to view mismatched settings. This page provides
links to display additional and current configurations. You can display all mismatched devices by navigating to
the APs/Devices > Mismatched page.
16 | Dell PowerConnect W Configuration in AirWave
22.
Dell PowerConnect W-AirWave 7.6 | Configuration Guide
"Supporting