Dell PowerConnect W-AirWave 7.6 Configuration Manual page 20

Figure 15:
APs/Devices > Audit Page Illustration
If the page reports a device mismatch, the page will display an Import button that allows you to import the Dell
PowerConnect W-Series controller settings from aDell PowerConnect W-Series controller that has already been
configured. To import the complete configuration from the controller (including any unreferenced profiles) select
the Include unreferenced profiles checkbox. If you deselect the checkbox, AirWave will delete the unreferenced
profiles/AP Groups on the controller when that configuration is pushed later, and they will not be imported.
In Global Configuration :
Importing this configuration creates all the Profiles and Dell PowerConnect W AP Groups on the Device Setup
> Dell PowerConnect W Configuration page. This action also adds and selects the Dell PowerConnect W AP
Groups that appear on the Groups > Dell PowerConnect W Config page.
The folder for all the Profiles and Dell PowerConnect W AP Groups is set to the top folder of the AirWave user
who imports the configuration. This folder is Top in the case of managing administrators with read/write
privileges.
In Group Configuration :
Importing this configuration creates Profiles and Dell PowerConnect W AP Groups in the controller's Groups >
Dell PowerConnect W Config page.
5. After configuration file import is complete, refresh the page to verify the results of the import and add or edit as
required.
6. Navigate to the Dell PowerConnect W Configuration page.
This page displays a list of APs authorized on AirWave that are using the Dell PowerConnect W AP Group.
n
The User Role is the Dell PowerConnect W User Role used in firewall settings. For additional information,
n
refer to "Security > User Roles" on page
Global Configuration only: The Folder column cites the visibility level to devices in each Dell PowerConnect
n
W AP Group. For additional information, refer to
page 25.
7. Add or modify Dell PowerConnect W AP Groups as required.
a. Navigate to the Dell PowerConnect W Configuration > Dell PowerConnect W AP Groups page.
b. Click Add from the Dell PowerConnect W AP Groups page to create a new Dell PowerConnect W AP
Group. To edit an AP Group, click the pencil icon next to the group. The Details page for the AP Group
appears. This page allows you to select the profiles to apply to the AP Group, and to select one or more
WLANs that support that AP Group.
14 | Dell PowerConnect W Configuration in AirWave
46.
"Visibility in Dell PowerConnect W Configuration" on
Figure 16 illustrates this page.
Dell PowerConnect W-AirWave 7.6 | Configuration Guide