Check The Board And Security Messages Log; Get Management Controller Information - Dell S5000 Series Getting Started Manual

Check the board and security messages log

Steps
1. Connect to the SHC.
2. Start the SHC:
a. Launch the web browser and enter the standard or secure IP address or host name of the primary module, according to
the settings. The Authentication page opens.
b. Complete the Username and Password fields and click Log On. The System Control page opens.
3. Check the board and security messages log:
a. From the Monitoring tab, click Messages to open the Messages page.
b. Browse messages, as required, using the navigation arrows or page number buttons.
CAUTION: This log can record up to 2,000 events. Once this limit is reached, the arrival of new messages will
automatically delete the oldest messages in the log.

Get Management Controller information

Steps
1. Connect to the SHC.
2. Start the SHC:
a. Launch the web browser and enter the standard or secure IP address or host name of the primary module, according to
the settings. The Authentication page opens.
b. Complete the Username and Password fields and click Log On. The System Control page opens.
3. Get Management Controller Information:
From the Maintenance tab, click Hardware Information > Management Controller to display the Management
Controller Information page.
Display firmware version
Steps
1. Connect to the SHC.
2. Start the SHC:
a. Launch the web browser and enter the standard or secure IP address or host name of the primary module, according to
the settings. The Authentication page opens.
b. Complete the Username and Password fields and click Log On. The System Control page opens.
3. Display the firmware version:
From the Maintenance tab, click Hardware Information > Firmware Version to display the Firmware Version page.
32 Basic Operations