Groups > Dell Powerconnect W Config Page - Dell PowerConnect W-AirWave 7.6 Configuration Manual

Navigate to Advanced Services > VPN Services > IPSEC > Dynamic Map > Transform Set from the Dell
PowerConnect W Configuration navigation pane. This page displays all currently configured Transform Sets, and
which Dynamic Maps reference them.
Select Add to create a new Transform Set, or click the pencil icon next to an existing Transform Set to modify
settings. The Add/Edit Details page contains the following fields, as described in
Table 36:
Advanced Services > VPN Services > IPSEC > Dynamic Map > Transform Set Add/Edit Details
Fields and Descriptions
Field
General Settings
Folder
Name
Other Settings
Encryption
Hash Algorithm
Select Add to create the new Transform Set, or click Save if editing an existing Transform Set. The Transform Set is
available for reference by Dynamic Maps in support of IPSEC profiles and VPN services.
Groups > Dell PowerConnect W Config Page
With Global Dell PowerConnect W Configuration enabled in AMP Setup > General, create Dell PowerConnect W
AP Groups with the Device Setup > Dell PowerConnect W Configuration page, as described in earlier in this
document. To view and edit profile assignments for Dell PowerConnect W AP Groups, perform these steps.
1. Navigate to the Groups > List page.
2. Select the name of the Dell PowerConnect W AP Group to view and edit, and navigate to the Dell
PowerConnect W Config page, illustrated in
Dell PowerConnect W-AirWave 7.6 | Configuration Guide
Default Description
Set the folder with which the Transform Set is associated. The drop-
Top down menu displays all folders available for association with the
Transform Set.
Blank Enter the name of the Transform Set.
168-bit 3DES-CBC Select the encryption for the transform set from the drop-down menu.
SHA (HMAC Variant) Select the hash algorithm from the drop-down menu.
Figure
Table
27:
36:
Configuration Reference | 79