Programming Remote Feature Access; Remote Access Password - Inter-Tel Standard Display Phone User Manual

To use the directory to leave a voice mail message:
Dial the voice mail extension number.
1.
Press
2.
Enter the desired name, as described above, and press
3.
played.
Do one of the following:
4.
·
Press
·
Press
·
Press
·
Press
·
Press
·
Press
P
ROGRAMMING
If you are away from your desk and forgot to put your phone in DND, don't worry.
With the Remote Feature Access, you can place your phone in DND or forward calls
from any other phone on the system. And, if you have a special dial-up line, you can
access your phone features from an outside line.
NOTE:
For your convenience, a pocket-sized guide of the Remote Feature Access is
located in the front of this guide.

Remote Access Password

Before you use Remote Feature Access, you should program a password, as described
below.
To change the password from your phone:
Dial
1.
3
Enter your current password, followed by
2.
NOTE:
Enter the new password followed by
3.
Enter the new password again for verification followed by
4.
mation tone.
To change the station password using remote programming, see the following section.
Axxess Standard Display and Basic Digital Phone User Guide
for Directory Services.
#
to accept the name.
#
to hear the previous name in the directory.
1
to hear additional information for the selected name (if allowed).
2
to hear the next name in the directory.
3
and spell a new name to search for a different name.
4
to switch the first/last name sort order.
5
R F
EMOTE EATURE
.
9 2
Your extension number is your password at default.
. The selected name is
#
A
CCESS
.
#
. You hear a confirmation tone.
#
#
. You hear a confir-
55