Performing A "Hookflash" During A Call; Programming Your Feature Keys; Enabling Paging - Inter-Tel Standard Display Phone User Manual

Enabling Paging

You can enable or disable page receiving for your phone by using the Page Remove/
Replace feature code. If your phone is assigned to more than one page zone, all zones
are removed or replaced at once (you cannot turn off individual zones).
To turn paging on and off for your phone:
Dial
3 2
P
ERFORMING A
Certain telephone service companies may require a timed hookflash (a quick hang up
and release).
To generate a hookflash while using a line:
¥
Press
P
ROGRAMMING
Depending on how your system is programmed, some of your feature keys may be
"user-programmable." If so, you can program them with any of the feature codes
listed in the back of this user guide or with extension numbers. In addition, you can
combine the feature key and Station Speed-Dial functions to program a feature key to
dial an outside number.
NOTE:
You cannot program secondary extension keys as feature keys (see Program-
ming Secondary Extension Keys on
To program a user-programmable feature key:
With the handset in the cradle, dial
1.
Press the feature key you want to program.
2.
Dial the feature code or extension number you want to store under that key.
3.
(Refer to the back of this guide for default feature codes.)
To return all feature keys to their original default values:
With the handset in the cradle, dial
To display the current feature key values:
With the handset in the cradle, dial
1.
Press the feature key(s) you want displayed.
2.
Press
3.
Axxess Standard Display and Basic Digital Phone User Guide
.
5
"H
OOKFLASH
and dial .
3 3 0
Y F
OUR EATURE
to hang up.
SPKR
" D C
URING A
K
EYS
page 50).
.
3 9 7
.
3 9 5
.
3 9 6
ALL
49