Placing Calls On Hold; Call Waiting - Inter-Tel Standard Display Phone User Manual

Call Waiting

If you receive a call while you are already on another call, you will hear a "call wait-
ing" tone and/or you will see a display.
To respond to a waiting call (you hear a single tone and a key is flashing):
·
To end the current call: Hang up. The waiting call rings in.
·
To place the current call on hold: Press
answer the waiting call.
·
To have the caller hear Do-Not-Disturb signals: Press
more information about Do-Not-Disturb mode.)
P C
LACING ALLS
You can place calls on hold in one of two ways: individual or system.
·
Individual Hold places the call on hold at one phone. It can then be directly
picked up at that phone or it can be picked up at another phone using the Call
Pickup (Reverse Transfer) feature (see
·
System Hold places the call on hold in the system. You can then pick up the call
at any phone that has a flashing key for the call, including the phone that placed it
on hold.
NOTE:
You cannot place intercom calls on system hold.
To place a call on Individual Hold:
Press
1.
Hang up or place another call.
2.
To place an outside call on System Hold:
Press
1.
Hang up or place another call.
2.
To return to a call that is on hold:
Lift the handset and press the flashing key.
Axxess Standard Display and Basic Digital Phone User Guide
O H
N OLD
.
HOLD
¥
and dial
3 3
. Then press the flashing key to
HOLD
page 18).
.
5
. (See page 31 for
DND
15