Conference - Yealink SIP-T20 User Manual

User Guide for the SIP-T20P/SIP-T20 IP Phone
2. Select the desired account from the pull-down list of Account.
3. Click on Advanced.
4. Select Network Conference from the pull-down list of Conference Type.
5. Enter the conference URI (e.g., conference@example.com) in the Conference URI
field.
6. Click Confirm to accept the change.
Note
Network conference is configurable via web user interface only.
To set up a network conference call:
1. Place a call to the first party.
2. Press
The active call is placed on hold.
3. Enter the second party's number and press
4. When the second party answers the call, press

conference.

5. Press
The conference is placed on hold.
6. Enter the number of the new party and then press
7. When the new party answers the call, press
conference.
8. Repeat steps 5 to 7 until you have added all intended parties.
72
to place a new call.
to place a new call.
or .
to add the second party to the
or .
to add the new party to the