Administrator Password; Key As Send - Yealink SIP-T20 User Manual

User Guide for the SIP-T20P/SIP-T20 IP Phone
and "YY" represents a two-digit year which is not displayed on the LCD screen of the
SIP-T20P/SIP-T20 IP phone.
The date formats you need to know:
Time and date is configurable via web user interface at the path Settings->Time & Date.
The Advanced option is only accessible to the administrator. The default administrator
password is "admin". For security reasons, you should change the default administrator
password as soon as possible.
To change the administrator password via phone user interface:
1. Press
2. Select Settings->Advanced (password: admin) ->Set Password.
3. Enter the old password in the Current PWD field.
4. Enter the new password in the New PWD field.
5. Enter the new password again in the Confirm PWD field.
6. Press
Administrator password is configurable via web user interface at the path
Security->Password.
You can set the "#" or "*" to act as the send key while dialing.
To configure key as send via phone user interface:
1. Press
20
Date Format
MM/DD/YY
DD/MM/YY
YY/MM/DD
.
1. Current PWD:
to accept the change.
.
Example (2013-11-15)
Nov 15
15 Nov
15 Nov
abc