Message; Voice Mail - Yealink SIP-T20 User Manual

User Guide for the SIP-T20P/SIP-T20 IP Phone
You can leave voice mails for someone else on the SIP-T20P/SIP-T20 IP phone. You can
also listen to the voice mails stored in a centralized location. When receiving a new
voice mail, the phone will play a warning tone and the MESSAGE key LED will illuminate
and the LCD screen will display a flashing icon.
Note
The voice mail feature is not available on all servers. Contact your system administrator
for more information.
To leave a voice mail:
You can leave a voice mail for someone else when he/she is busy or inconvenient to
answer the call. Follow the voice prompt from the system server to leave a voice mail,
and then hang up.
To configure voice mail access codes via phone user interface:
1. Press
2. Select Messages->Set Voice Mail.
3. Press
4. Press
code (e.g., *88).
5. Press
Note
Voice mail access code must be predefined on the system server. Contact your system
administrator for the more information.
To listen to voice mails:
1. When the phone user interface prompts receiving new voice mails, press
92
New Voice Mail
27 Sep 11:35
.
1. Account 1 No.:
*88
or to select the account you want to set.
to select the proper input mode and then enter the voice mail access
to accept the change.
123