Scanning Many Originals At Once; Build - Sharp MX-5500N Scanner Manual

SCANNING MANY ORIGINALS AT ONCE

(Job Build)
This function lets you separate an original consisting of numerous pages into sets, scan each set using the automatic
document feeder, and transmit the pages in a single transmission. Use this function when the number of originals that
you wish to scan exceeds the maximum number of sheets that can be inserted in the automatic document feeder at
once.
When scanning originals that are separated into sets, scan the set that has the first page first. The settings that you
select for the first set can be used for all remaining sets.
Originals
1
When using USB memory mode, connect the USB memory device to the machine before performing the procedure below.
Indicator
line
1
Select the special modes.
(1) Touch the tab of the mode that you wish to use.
2
(2) Touch the [Special Modes] key.
☞
SPECIAL MODES
Scan/Special Modes
Program
3
Timer
Job

Build

File
Originals are
scanned in
separate sets
1
101
(page 70)
(1)
Dual Page
Erase
Scan
Suppress
Card Shot
Background
Mixed Size Slow Scan
Mode
Original
Quick File
Insert the originals face up in the
document feeder tray.
Insert the originals all the way into the document feeder tray.
Multiple originals can be placed in the document feeder tray.
The stack of originals must not be higher than the indicator line
on the tray.
Select job build mode.
(2)
(1) Touch the [Job Build] key so that it is
OK
highlighted.
(2) Touch the [OK] key.
87
Transmission
1
1