Sharp MX-5500N Scanner Manual page 29

(1)
Scan Internet Fax
Address Book
Original
Address Entry
Exposure
Send Settings Resolution
File Format
Address Review
Colour Mode
File
Special Modes
Quick File
2
The current settings for [Original], [Exposure], [Resolution], [File Format], and [Colour Mode] are indicated at the right
of each key. To change a setting, touch the appropriate key.
☞
AUTOMATICALLY SCANNING BOTH SIDES OF AN ORIGINAL (2-Sided Original)
ORIGINAL SCAN SIZE AND SEND SIZE (Enlarge/Reduce)
EXPOSURE MODE (ORIGINAL IMAGE TYPE)
CHANGING THE FILE FORMAT
(page 70)
Scan/Original
Scan Size
Auto
3
2-Sided 2-Sided
Booklet Tablet
The original orientation is initially set to
necessary.
(2)
Fax USB Mem. Scan
Scan: Auto A4 Send:
Auto Text
200X200dpi
PDF PDF
Auto/Greyscale Mono2
(page 65),
(1)
100% Send Size
A4 Auto
Image Orientation
Switch to scan mode and display the
image settings screen.
PC Scan
(1) Touch the [Scan] tab.
Auto
(2) Touch the [Original] key.
(page56),
(page 62), CHANGING THE RESOLUTION
CHANGING THE COLOUR MODE
Specify the orientation in which the
(2)
original is placed.
OK
To enable the original to be scanned in the correct orientation
(the orientation of the top edge of the original that is shown at
the top of the display), specify the orientation in which the
original was placed in step 1.
(1) Touch the appropriate orientation key.
If the top edge of the original is up, touch the
the top edge of the original is to the left, touch the
key.
(2) Touch the [OK] key.
You will return to the screen of step 2.
. If the original was placed with the top edge up, this step is not
29
(page 55), SPECIFYING THE
CHANGING THE EXPOSURE AND
(page 64),
(page 69), 4. SPECIAL MODES
key. If