Sharp MX-5500N Scanner Manual page 75

(1)
Scan/Special Modes
Erase
3
Edge Centre
Erase Erase
(3)
To
5 10 15
Condition
Settings
AAA AAA
Address Review
CCC CCC
Address Entry
EEE EEE
Global
GGG GGG
Address Search
III III
4
Frequent Use
Sort Address
• When scanning to USB memory, there is no need to specify the destination. Go to step 5.
• In addition to specification by a one-touch key, a destination can also be specified by a search number. You can
also manually enter an e-mail address or look up an e-mail address in a global address book. For more information,
see "2. ENTERING
5
If the destination is an Internet fax destination, press the [BLACK & WHITE START] key (
To cancel scanning...
Press the [STOP] key (
(2)
Cancel
Edge+Centre
Edge
Erase
10
(0~20)
mm
(2)
Cc
BBB BBB
DDD DDD
FFF FFF
HHH HHH
JJJ JJJ
ABCD EFGHI JKLMN OPQRST
DESTINATIONS" (page 20).
or
) to cancel the operation.
Select the erase settings.
(3)
(1) Touch the desired erase mode.
OK
Select one of the three erase modes.
OK
(2) Set the erasure width with the
0 mm to 20 mm (0" to 1") can be entered.
(3) Touch the [OK] key.
Specify the destination.
(1) Touch the [Address Book] key in the base
screen.
1
2
(2) Touch one-touch keys of the destinations
that you wish to store in the group.
(3) Touch the [To] key.
UVWXYZ
Press the [COLOUR START] key
( ) or the [BLACK & WHITE
START] key (
Scanning begins.
• If you inserted the original pages in the document feeder
tray, all pages are scanned.
A beep will sound to indicate that scanning is finished.
• If you are scanning the original on the document glass, scan
each page one page at a time.
When scanning of one page finishes, replace it with the next
page and press the [COLOUR START] key (
[BLACK & WHITE START] key (
have been scanned and then press the [Read-End] key.
A beep will sound to indicate that scanning is finished.
75
).
). Repeat until all pages
).
keys.
) or the