Sharp MX-5500N Scanner Manual page 60

Specifying the send size of the image
Specify the send size as a paper size. If a send size bigger than the scan size is selected, the image will be enlarged. If
a send size smaller than the scan size is selected, the image will be reduced.
• The send size cannot be specified when [Long Size] is selected for the scan size, or when the scan size is specified by
numerical values.
• The send size cannot be specified when [TIFF-S] is selected for the format in Internet fax mode. (The send size is fixed at
A4R (8-1/2" x 11"R).)
Scan Internet Fax
Address Book
Original
Address Entry
Exposure
Send Settings
Resolution
1
Address Review File Format
Colour Mode
File
Special Modes
Quick File
(2)
Scan/Original
Scan Size
Auto
2
2-Sided
Booklet
Scan/Original
Auto
Manual
A5
A5R
3
B5
• Depending on the paper size specified for the "Scan Size", it may not be possible to select some sizes for the "Send
Size". Size keys that cannot be specified for the "Send Size" are greyed out to prevent selection.
• To specify an inch size for the send size, touch the [AB
send size.
(1)
Fax USB Mem. Scan
Scan: Auto
A4 Send:
Auto Text
200X200dpi
PDF PDF
Auto/Greyscale Mono2
100% Send Size
A4 Auto
Image Orientation
2-Sided
Tablet
(1)
A4
B5R B4
A4 A3
A4R
Select the mode and display the image
settings screen.
PC Scan
(1) Touch the tab of the mode that you wish to
Auto
use.
(2) Touch the [Original] key.
Touch the [Send Size] key.
OK
Specify the send size.
(2)
(1) Touch the desired send size key.
OK
(2) Touch the [OK] key.
AB
Inch
Inch] key to highlight the [Inch] side and then specify the
60