Sharp MX-5500N Scanner Manual page 96

(3)
5 10 15 To
Condition
Settings
AAA AAA
Address Review
CCC CCC
Address Entry
EEE EEE
Global
GGG GGG
Address Search
6
III III
Frequent Use
Sort Address
In addition to specification by a one-touch key, a destination can also be specified by a search number. You can also
manually enter an e-mail address or look up an e-mail address in a global address book. For more information, see
ENTERING DESTINATIONS" (page 20).
7
The [Configure] key can be touched in the scan-end confirmation screen to change the exposure, resolution, scan
size, and send size. (However, when scanning each even-numbered page of the original, only the exposure can be
changed.)
To cancel scanning...
Press the [STOP] key (
• Transmission is not possible at a size smaller than the original size.
• The 2in1 function cannot be used when the original is other than A4, B5, or A5 (8-1/2" x 11" or 5-1/2" x 8-1/2") size.
• When the scan size of the original is specified by numerical values, this function cannot be used.
To cancel 2in1...
Touch the [2in1] key in the screen of step 3 so that it is not highlighted.
(2)
Cc
BBB BBB
DDD DDD
FFF FFF
HHH HHH
JJJ JJJ
EFGHI JKLMN OPQRST UVWXYZ
ABCD
) to cancel the operation.
Specify the destination.
(1) Touch the [Address Book] key in the base
screen.
1
2
(2) Touch one-touch keys of the destinations
that you wish to store in the group.
(3) Touch the [To] key.
Press the [BLACK & WHITE START] key
( ).
Scanning begins.
• If you inserted the original pages in the document feeder
tray, all pages are scanned.
A beep will sound to indicate that scanning is finished.
• If you are scanning the original on the document glass, scan
each page one page at a time.
When scanning finishes, place the next original and press
the [BLACK & WHITE START] key (
pages have been scanned and then touch the [Read-End]
key.
A beep will sound to indicate that scanning is finished.
96
"2.
). Repeat until all