Sharp MX-5500N Scanner Manual page 81

• The time can be specified up to a week in advance.
• Up to 94 timer transmissions can be stored at once.
• If another transmission is in progress when the specified time arrives, the timer transmission will begin after that
transmission is finished.
• Other transmissions can be performed as usual after a timer transmission is stored.
• A timer transmission can be deleted in the job status screen.
• If a timer transmission is given priority in the job status screen, the time specification is cancelled. The transmission will
begin as soon as the job in progress is completed.
☞
GIVING PRIORITY TO A SCAN TRANSMISSION JOB
To cancel timer transmission...
Touch the [Cancel] key in the screen of step 3.
(page 106)
81