Input Source Selection (Rgb(Pc Digital), Rgb(Av Hdcp)) - Sanyo PLC-XU305A Owner's Manual

Computer Input

Input Source Selection (RGB(PC digital), RGB(AV HDCP))

Direct Operation
Choose Computer  by pressing the INPUT button on the top control or press the COMPUTER button on the
remote control.
Before using these buttons, correct input source should be selected through Menu operation as described
below.
Remote Control
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point

Use the Point
▲▼
then press the Point
3
Use the Point
▲▼
or RGB(AV HDCP) and then press the SELECT
button.
Note:

• HDCP (High-bandwidth Digital Content Protection) is
a system for protecting digital entertainment content
delivered by DVI (Digital Visual Interface) from being
copied. The specification of HDCP is decided and
controlled by Digital Content Protection, LLC. Should the
specification be changed, this projector may not display
the digital content protected by HDCP.
• Network is for the Network function. See owner's
manual "Network Set-up and Operation" .
• When the Input Search function is set to On1 or On,
the input signal will be searched automatically (p.47).
30
COMPUTER button
Computer 1
Computer 
buttons to select Input and
▲▼
or SELECT button.
►
buttons to select Computer  and
or SELECT button.
►
buttons to select RGB(PC digital)
INPUT button
Top Control
Input Menu
Computer

Computer 1
Computer 
Video
S-video
Network
RGB
RGB(PC digital)
Wired 1
RGB
RGB(PC digital)
Wired 1