Input Source Selection(Rgb(Pc Digital), Rgb(Av Hdcp)); Direct Operation; Menu Operation - Sanyo PLC-WXU3ST Owner's Manual

Input Source Selection (RGB(PC digital), RGB(AV HDCP))

Direct Operation

Choose Computer 1(Digital) by pressing the INPUT
button on the top control or press the COMPUTER
button on the remote control.
Before using these buttons, correct input source
should be selected through Menu operation as
described below.

Menu Operation

1 Press the MENU button to display the On-Screen
Menu. Use the Point ◄► buttons to move the
red frame pointer to the Input Menu icon.
Use the Point ▲▼ buttons to move the red

arrow pointer to Computer 1 (Digital), and then
press the SELECT button.
After the Source Select Menu appeared for
3
Computer 1 (Digital), move the pointer to RGB
(PC digital) or RGB (AV HDCP), and then press
the SELECT button.
Notes:
• HDCP (High-bandwidth Digital Content Protection)
is a system for protecting digital entertainment
content delivered by DVI (Digital Visual Interface)
from being copied. The specification of HDCP
is decided and controlled by Digital Content
Protection, LLC. Should the specification be
changed, this projector may not display the digital
content protected by HDCP.
• When the Input Search function is set to "On1"
or "On2", the input signal will be searched
automatically (p.47).
Top Control
PC
Remote Control
Input Menu icon
Input Menu
Computer
1
Computer Input
INPUT button
Computer 1 (Analog)
Computer 1 (Digital)
Computer 
Video
COMPUTER button
Computer 1 (Analog)
Computer 1 (Digital)
Computer 
Move the pointer
(red arrow) to
Computer 1 (Digital)
and press the
SELECT button.
Move the pointer to
the source that you
want to select and
press the SELECT
button.