Top Control - Sanyo PLC-WXL46A Owner's Manual

Part Names and Functions

Top Control

① SELECT button
–Execute the selected item (p.20).
–Expand or compress the image in Digital zoom
mode (p.33).
② ON–OFF button
Turn the projector on or off (pp.18-19).
③ MENU button
Open or close the On-Screen Menu (p.20).
④ POWER indicator
–Lights red when the projector is in stand-by mode.
–Lights green during operations.
–Blinks green in the Power management mode
(pp.45, 61).
⑤ INPUT button
Select input source (pp.25, 34, 35).
10
① ② ③ ④ ⑤ ⑥ ⑦
⑨
⑥ WARNING indicator
⑦ LAMP REPLACE indicator
⑧ KEYSTONE button
⑨
⑧
–Lights red light when the projector detects an
abnormal condition.
–Blinks red when the internal temperature of the
projector exceeds the operating range(pp.51, 61).
Turn yellow when the life of the projection lamp
draws to an end (pp.54, 61).
Correct the keystone distortion (pp.22, 41).
POINT (▲▼◄►) buttons
–Select an item or adjust the value in the On-
Screen Menu (p.20).
–Pan the image in Digital zoom + mode (p.33).
–Adjust the volume level (Point ◄► buttons)
(p.23).