Table of Contents
Advertisement
Basic Operation
AUTO PC button
Press the AUTO PC button to operate the Auto PC function.
See page 27 for more details.
D .ZOOM buttons
Press the D.ZOOM buttons to zoom in and zoom out the
images. See page 33 for more details.
NO SHOW button
Press the NO SHOW button to black out the image. To
restore to normal, press the NO SHOW button again or
press any other button. When the projected image is
captured and is set as "User" in the Logo selection (p.42),
the screen changes each time you press the NO SHOW
button as follows.
black out → the captured image → normal →
KEYSTONE button
For details, see page 22.
IMAGE button
Press the IMAGE button to select an image level of the
screen. See pages 30, 37 for more details.
P-TIMER button
Press the P-TIMER button. The timer display "00:00"
appears on the screen and the timer starts to count time
(00:00–59:59).
To stop the P-Timer, press the P-TIMER button. Press the
P-TIMER button again, then the P-timer display disappears.
LAMP CONTROL button
Press the LAMP CONTROL button to select the lamp mode
to change the brightness of the screen.
Normal ... Normal brightness
Eco ...... Lower brightness reduces the lamp power
consumption and extends the lamp life.
4
Remote Control
VOLUME +/-
buttons
(See page 23.)
AUTO PC
button
D .ZOOM
buttons
NO SHOW
button
Note:
See the previous page for the description
of other buttons.
• • • • •
"No show" disappears after 4 seconds.
P-Timer display
No show
KEYSTONE button
(See page 22.)
POINT ▲▼
buttons
IMAGE button
P-TIMER button
LAMP CONTROL
button
Advertisement
Table of Contents
