Elo TouchSystems D-Series User Manual page 38

Here is some important information on the proper setup and maintenance of your
touchcomputer.
To reduce the risk of electric shock, follow all safety notices and never open the touchcomputer
case.
Turn off the product before cleaning (refer to "Care and Handling" on page 30 for proper cleaning
methods).
Your touchcomputer is equipped with a 3-wire, grounding power cord. The power cord plug only
fits into a grounded outlet. Do not attempt to fit the plug into an outlet that has not been configured
for this purpose. Do not use a damaged power cord. Only use the power cord that comes with
your Elo TouchSystems touchcomputer. Use of an unauthorized power cord might invalidate your
warranty.
The slots located on the sides and top of the touchcomputer case are for ventilation. Do not block
or insert anything inside the ventilation slots.
It is important that your touchcomputer remains dry. Do not pour liquid into or onto your
touchcomputer. If your touchcomputer becomes wet, do not attempt to repair it yourself.
C H A P T E R
15D1 T U
OUCHCOMPUTER
4
G 33
SER UIDE