Table of Contents
Advertisement
Feature
Language
Recall
Miscellaneous
Exit
OSD and Power Button Control
The OSD menu and power button are enabled by default.
To enable or disable the OSD function:
1. Simultaneously press Menu/Exit and the Left (<-) key for two seconds. A
window appears displaying OSD ENABLE or OSD DISABLE.
2. When the OSD is disabled, the OSD menu is not visible.
To enable or disable the power button (PWR) lock function:
1. Simultaneously press Menu/Exit and the Right (->) key for two seconds. A
window appears displaying PWR ENABLE or PWR DISABLE.
2. When the power button lock feature is activated, the power button is disabled.
Base Power Status LED
The D-Series base has two LEDs that indicate the power status and hard drive
status. See the figure on page 9, item 1 for the location of this LED. The light can
be green, flashing green, red, or off. The table below shows LED state and
corresponding color.
LED Color to Observer
Off
Red
Flashes green
Green
Description
Changes language to English, French, Italian, German, Spanish,
Japanese, Simplified Chinese, or Traditional Chinese.
Sets color recall and recall defaults. Restores original factory
settings.
Adjusts sharpness, enables/disables DDCCI function.
Sharpness: Adjusts sharpness of video.
Exits the OSD.
State
No input power — Off mode
Input power present, power switch off — Off mode
Input power present — Sleep mode
Input power present — On mode
15D1 T
U
OUCHCOMPUTER
G
15
SER
UIDE
Advertisement
Table of Contents
