Appendix 2: Smart Grid Event Type Description - Lenovo ThinkServer User Manual

Appendix 2: Smart Grid Event Type Description

Level
Errors
Information
Alarms
Alarms
Alarms
Alarms
Alarms
Alarms
Alarms
Alarms
Information/Alarms/Errors
Information/Alarms/Errors
Note: "X" is a threshold value, which is configured via Threshold Setting page.
Event Type Event Description
DCM Event DCM lost communication with a node
DCM Event DCM restored communication with a node
Can not collect CPU utilization ratio and Memory utilization ratio, reason: The server
Collector event refuses to connect. Please be sure that the Telnet/SSH service on the server is
configured correctly.
Collector event Can not collect probe data, reason: Operating system type not set for probe
Collector event Can not collect Ping data, reason: Error to connect to the server
Can not collect CPU utilization ratio and Memory utilization ratio, reason: DCOM
Collector event
error.
Can not collect CPU utilization ratio and Memory utilization ratio, reason: Message
Collector event
not found for errorCode:
Dynamic policy event Can not collect CPU utilization ratio to optimize power consumption
Dynamic policy event Cannot set dynamic policy, the KPI of service is bad, CPU utilization ratio is normal
Dynamic policy event Can not remove policy from DCM
Threshold event Memory utilization ratio > X%
Threshold event CPU utilization ratio > X%
45