Chapter 3. Product Instructions; Access To System; First Login - Lenovo ThinkServer User Manual

Chapter 3. Product Instructions

3.1 ACCESS TO SYSTEM

Enter http://xx.xx.xx.xx:8888/smartgrid/ in your browser (xx.xx.xx.xx is the IP address where you will install your app), and then you can use Smart Grid
products. You can enter [user name/password] in the welcome screen, and Smart Grid will select Chinese/English automatically depending on the
language of your browser, while you can also manually select the required language and then click "OK" to enter the system.
Note: the default Smart Grid user name is "admin" and password is "Passw0rd".
Clicking "Reset" can remove the entered information quickly, as illustrated below:

3.1.1 FIRST LOGIN

If this is your first login after installation, the system will help you finish the required settings. Here are the steps:
Change the system default password.
When you enter the welcome page, you can choose to either skip over the wizard or to import your device. If you do not choose, then follow the
procedure i.e. Fill in the Information  Discover a Device  Enable the learning stage to start the power consumption management.
Before your device is discovered, you are required to fill in some necessary information including BMC IP start address and BMC user name and
password (if the default settings of BMC are not changed in Lenovo ThinkServer servers, you are only required to enter the configured IP range), and
after that, the device discovery starts.
After the device discovery is finished, the system will be allocated to the group of initialized devices by default. You can click "Device Tree Diagram" to
reassign it to the group of custom devices. If the auto discovery fails, click "Common Causes for Auto Discovery Failure" to check the common causes
and deal with them manually.
For discovered devices, you can enable the learning stage immediately and start to collect and analyze the power consumption of these devices.
15