Lenovo ThinkServer User Manual page 25

2. The Conversion Process under Policy Forbidden
During the operation of a server device, it's clearly required to only perform power consumption monitoring on the server device, but not conduct power
consumption control. Server devices enter into the Policy Forbidden status, then can normally collect power consumption and performance data (if
proceeded with performance collection configuration). Policy Forbidden status can be entered from Learning Stage status, Enable Policy status and
Policy Enabled status. It is possible to convert from the Policy Forbidden status to Learning Stage status. The Conversion Process under Policy
Forbidden, as shown in the figure below:
3. The Conversion Process under the In Exception Status
During the operating of the server device, the situation that the power consumption data cannot be collected may happen, in event of such situation,
the device will automatically enter the In Exception Status until the power consumption data can be collected, then the device will recover from the In
Exception Status to the previous status. For example: the situation that the power consumption data cannot be collected happens during the Learning
Stage, the sever will enter into In Exception Status, and when the power consumption data can be collected normally, then the server will recover from
In Exception status to Learning Stage status. The Conversion Process under In Exception Status, as shown in the figure below:
24