Unpacking; Connect To The Power Supply - Pfaff Espression line Owner's Manual

Unpacking

packaging and lift off the machine carrying
case.
plastic bag.
styrofoam inside.
Note: Styrofoam left in the accessory tray while sewing
may affect stitch quality. The styrofoam is for packing
purposes only and should be removed.
Note: Your PFAFF Expression sewing machine is
®
adjusted to provide the best stitch result at normal room
temperature. Extreme hot and cold temperatures can
affect the sewn result.

Connect to the power supply

cord and the foot control.
Note: Before plugging in the foot control, check to
ensure that it is type "FR5" (see underside of foot
control).
1. Take out the foot control cord. Turn the foot
to make sure it is properly connected. Lay the
cord in the slot on the underside of the foot
control.
Note: Connecting the foot control cord to the foot
going to use the machine.
2. Connect the foot control cord to the front
socket on the bottom right side of the machine
3. Connect the power cord to the rear socket on
the cord into the wall socket.
For the USA and Canada
polarized outlet only one way. If the plug does not
2:2
C A B