Preparations; Unpacking; Connect To The Power Supply; Pack Away After Sewing - Pfaff passport 2.0 Owner's Manual

Preparations

Unpacking

packaging and lift off the machine carrying
case.
plastic bag.
Note: Your PFAFF® passport™ 2.0 sewing machine is

Connect to the power supply

cord and the foot control.
the power cord when the machine is not in use.
For this sewing machine, foot control model C-9002
must be used.
1. Connect the foot control cord to the front
socket on the bottom right side of the machine
2. Connect the power cord to the rear socket on
the cord into the wall socket.

Pack away after sewing

2. Unplug the cord from the wall socket and then
from the machine.
3. Unplug the foot control cord from the machine.
Wind the cord around the foot control for easy
storage.
the tray on to the machine around the free arm.
free arm.
10
C
B
A
For the USA and Canada
polarized outlet only one way. If the plug does
in any way.