Preparations; Unpacking; Connect To The Power Supply - Pfaff 260C Owner's Manual

2 Preparations

Unpacking

1. Place the box on a steady, flat surface. Lift the
machine out of the box, remove the outer packaging
and lift off the machine carrying case.
2. Remove all outer packing material and the plastic
bag.
Note: Your SMARTER BY PFAFF™ 260c machine is
adjusted to provide the best stitch result at normal room
temperature. Extreme hot and cold temperatures can affect the
sewn result.

Connect to the power supply

Among the accessories you will find the power cord and
the foot control.
Note: Consult a qualified electrician if in doubt as to how to
connect the machine to the power source. Unplug the power
cord when the machine is not in use.
For this sewing machine, foot control model C-8001
manufactured by ZENG HSING INDUSTRIAL CO.,
LTD must be used.
1. Connect the foot control cord to the front socket on
the bottom right side of the machine (A).
The sewing speed is controlled by pressing the foot
control.
2. Connect the power cord to the rear socket on the
bottom right side of the machine (B). Plug the cord
into the wall socket.
3. Press the ON/OFF switch to ON to turn on power
and light (C).
For the USA and Canada
This sewing machine has a polarized plug (one blade
wider than the other). To reduce the risk of electric
shock, this plug is intended to fit in a polarized outlet
only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a
qualified electrician to install the proper outlet. Do
not modify the plug in any way.
10