Changing The Needle; Lowering Feed Dogs; Changing The Presser Foot - Pfaff Espression line Owner's Manual

Changing the needle

1. Use the hole in the multi-purpose tool to hold
the needle.
if necessary.
4. Insert the new needle, using the multi-purpose
tool. Push the new needle upwards with the
further.
5. Tighten the needle screw as tight as it will go.

Lowering feed dogs

on the front of the sewing machine to the left.
feed dogs.

Changing the presser foot

Remove presser foot
Press the presser foot downwards until it
disengages from the presser foot holder.
Attach presser foot
Place the presser foot under the presser foot holder,
so that when the presser foot is lowered, the pins of
the foot engage in the presser foot holder.
Note: Check that the presser foot is properly attached by
raising the presser foot.
2:9