Pfaff Espression line Owner's Manual page 25

Stitch width or stitch positioning (10)
Increase or decrease the stitch width using the +
and - buttons.
positioning for the selected stitch. Use the + and -
buttons to change the stitch position.
Stitch length or stitch density (11)
Increase or decrease the stitch length using the +
and - buttons.
density setting for satin stitches. Use the + and
- buttons to change the density for the selected
stitch.
Alternatives (12)
and length settings will be shown on the graphic
stitch positioning will be shown instead of the
stitch width setting and the density will be shown
instead of the length setting.
Wheel (13)
display. The wheel has up and down arrow
buttons, left and right arrow buttons and the wheel
between stitches, setting the size of a buttonhole
Direct selection (14)
buttons, you select the stitch represented by that
number immediately.
F1 - Function 1 (15)
The F1 button is used to set the tapering program.
It is also used to repeat buttonholes and to
will be shown on the graphic display.
character set.
F2 - Function 2 (16)
The F2 button is used to set the tie-off options and
will be shown on the graphic display.
Info button (17)
Press this button to toggle the recommendations
Settings menu (18)
Press this button to open the menu for machine
settings.
Mirror side to side (19)
For mirroring stitches side to side.
Load personal stitch or sequence (20)
Press this button to load a personal stitch or
Save personal stitch or sequence (21)
Clear (22)
Sequencing (23)
2:13