Settings Menu - Pfaff Espression line Owner's Manual

Settings menu

settings, sound settings and screen settings.
pressing the up and down arrow buttons on the wheel.
Note: If a setting cannot be combined with a previously selected setting, the outlines of that box will be dashed.
There are two icons which are shown next to some
This icon shows you that the setting will be
kept until you select another stitch.
This icon shows you that the setting will be
kept until you switch your machine off.
No icon means that this setting is kept until you
settings menu.
Thread tension (4.2)
on the fabric, batting, thread etc, the tension may
The changes only affect the selected stitch. The
setting will go back to default when you select
another stitch.
In sewing mode, press the info button to
see the current selected thread tension.
For 3.2:
the thread tension.
Twin needle
and right arrow buttons on the wheel to set the
twin needle width. When a twin needle size is
selected, the width of all stitches is limited for that
In sewing mode, press the info button. The
twin needle recommendation icon will be
shown.
The setting is kept until you deselect the twin
needle setting.
Note: Twin needle and stitch width safety cannot be
used at the same time.
A warning pop-up will be shown if you select a stitch
that is too wide for the set twin needle size.
Stitch width safety
needle plate or a straight stitch presser foot to lock
damage to the needle, presser foot or needle plate.
In sewing mode, press the info button. The
stitch width safety icon will be shown.
When turning on the machine with this setting
a straight stitch, a pop-up informs you that it is set
back to normal sewing.
Note: Twin needle and stitch width safety cannot be
used at the same time.
Dynamic spring foot 6D (4.2)
and will raise and lower with each stitch to hold
the fabric on the needle plate while the stitch is
being formed.
Note: The Dynamic spring foot 6D is recommended for
use with straight stitch. Activate Stitch width safety.
2:15