Troubleshooting - Pfaff Espression line Owner's Manual

Troubleshooting

you.
Problem/cause
General problems
Wrong stitch , irregular or narrow stitch?
The needle breaks?
The machine will not sew?
The sewing machine function buttons do not
respond to touch?
The machine skips stitches
Is the needle bent or blunt?
Is the correct presser foot used?
Is the needle too small for the thread?
Needle thread breaks
Is the needle bent or blunt?
Is the needle too small for the thread?
which has become dry?
Remedy
Enable automatic thread snips in the settings menu.
Make sure that machine is not set in free-motion mode
in the settings menu.
Make sure that the feed dogs are not lowered.
settings menu.
Insert needle correctly as described in chapter 2.
Check that all plugs are securely plugged into the
machine and into the wall socket.
Check that the foot control cord is securely plugged
into the foot control.
The sockets and function buttons on the machine can
Insert needle correctly as described in chapter 2.
Use needle system 130/750 H.
Insert a new needle.
Check how the machine is threaded.
Make sure the needle is correct for the thread and
fabric.
menu.
Insert needle correctly as described in chapter 2.
Use needle system 130/750 H.
Insert a new needle.
Check how the machine is threaded.
Change the needle to the proper size for the thread.
5:3