Planet IKVM-8020 User Manual page 50

Note: Changing the network settings of the IP-KVM might result in losing
connection to it. In case you change the settings remotely make sure that
all the values are correct and you still have an option to access the IP-KVM.
System Setting
IP auto configuration
Preferred host name
IP address
Subnet Mask
Gateway IP address
With this option you can control if the IP-KVM should fetch its
network settings from a DHCP or BOOTP server. For DHCP,
select "dhcp", and for BOOTP select "bootp" accordingly. If you
choose "none" then IP auto configuration is disabled.
Preferred host name to request from DHCP server. Whether
the DHCP server takes the IP-KVM suggestion into account or
not depends on the server configuration.
IP address in the usual dot notation.
The net mask of the local network.
In case the IP-KVM should be accessible from networks other
than the local one, this IP address must be set to the local
network router's IP address.
50
8-port Combo KVM Over IP Switch
IKVM-8020