Table of Contents
Advertisement
Selection BAR:
It shows the selection bar (Green); you can use the ↑↓ keys on
the board to move the selection bar, and the situated position indicates the
selected target for giving instructions. For example, if the selection bar points at
C#05 and you press Enter, then the system will switch to that particular PC or
press the "Space BAR" to start editing the name. Press F4 to enable/disable
the SVS option.
4、Instruction Hint Field:
↑↓:
(Move)
SPACE:
(Edit)
ESC:
(Exit)
F4:
(Auto Scan)
F9:
(System Setting)
F5:
(Clear Name List)
F1:
(Smart View)
Use the ↑↓ keys on the keyboard or the mouse to move the selection
bar
The "Space BAR" on the keyboard is used to start editing the name of
the PC or KVM.
Use the "Esc" key on the keyboard to exit the current option or exit
OSD.
Use the F4 key to run Auto Scan, and you can set the residing time,
channel display time and mode of the Auto Scan from System Setting.
Use the F9 key to enter into the System Setting Menu.
Use the F5 key to clear the values of all Name fields. If you clear the
name list under the Master screen, then you will also clear the name
lists under all slaves. If you clear the name list under a certain slave,
then you only clear the name list under that particular Slave KVM.
It switches the Smart View Setting.
19
8-port Combo KVM Over IP Switch
IKVM-8020
Advertisement
Table of Contents
