Table of Contents
Advertisement
2. This field shows the list of the Master KVM or a certain set of Slave KVM
currently displayed on the OSD. We recommend you to give a name to
the Slave KVM, or else the display after LIST: will be blank.
3. This field shows the list of connections to the KVM, and the fields are
described below: PWR: It shows the status of power supply and
indicates a normal power supply for the equipment (PC or KVM)
connected to the CPU port.
It shows the channel number; the KVM-810 will display 01~08 and the KVM-1610
C#:
will display 01~08; 09~16 (Since the screen cannot display all at a time, therefore
you can use PgUp / PgDn to switch the pages).
KVM:
It shows the KVM model. If there is a number in this field, it shows that a
set of KVM connects to this port. The number 04 indicates Port 4 and 08
indicates Port 8 and 16 indicates Port 16 and so on.
If the connected KVM is not on, there will have no number in this
field.
NAME:
It shows the name of the equipment, and users can name the Slave
KVM or PC on their own. There are a total of 12 characters selected from the
group of "A~Z", "a~z", "0~9" , "＋", "－" , "＊", "／" , "＝", "［","］", "，", "．", "：".
Please use the CapsLock to toggle the upper and lower cases.
SVS:
It shows the Smart View Setting; use ♁ to open and Θ to close. The
SVS is blank and not clickable if the KVM is connected in parallel. If this option
is set to open, then you can make the switch by operating the Hot Key Switch
or Mouse Clicking or selecting the option by Auto Scan. You also can use
mouse to click this field.
8-port Combo KVM Over IP Switch
18
IKVM-8020
Advertisement
Table of Contents
