8-port Combo KVM Over IP Switch
IKVM-8020
Step 6 Connecting VGA/Mouse/Keyboard port of PC(s) to the KVM
Switch
Install the Master KVM to the 3-in-1 cable (same as the cable for connecting
the KVM to the PC) in the middle of the Slave KVMs.
The rear side of PC
Step 7 Check Again
Double-check all of the connections. You can check the color of keyboard and
mouse connector to make sure the keyboard and mouse cables go to the
correct ports.
Step 8 Connecting Other PCs
Repeat step 5 - 6 for the remainder of the computers.
Step 9 Connecting KVM Power
Attach the power supply to the KVM unit and plug the other end into an
electrical receptacle. Now you will see the LED for Port 1 light up, and you will
hear a beep. Switch on your monitor.
14