Table of Contents
Advertisement
F1:
Information; It provides the model name and F/W version information,
which is helpful for users to understand the updated version.
F4:
OSD Position; you can enter the OSD position to make adjustments; we
recommend you to unify the resolution for all computer display mode, and use
this function again to adjust the OSD position. You can use the Up, Down, Left
or Right keys on the keyboard or a mouse to move the OSD position.
F8:
Restore Default Setting; Restore the factory default settings. Please note
that all name lists will be cleared and the system settings are set to the default
settings as shown in the table above.
Esc:
Exit; Exit the system setting and close the OSD. If you have made
changes in this option, the system will ask whether or not you want to save the
setting before the selected option is effective.
Auto Scan
Mode: You can start the OSD first and press "F4" to enter the Auto
Scan Mode. If you want to scan the PC, you must use the Smart View Setting
to select the Auto Scan Time in the System Setting for the residing time, which
includes 5 sec, 10 sec, 20 sec, 30 sec and 60 sec. You can adjust the Channel
Display Mode and Channel Display Time from the Channel Display mode. By
then, all keys on the panel, keyboard and mouse are not operable. You can
only use the ESC key to exit the Auto Scan Mode.
8-port Combo KVM Over IP Switch
22
IKVM-8020
Advertisement
Table of Contents
