Telstra EasyTouch Discovery User Manual page 40

5.5.1 How to Disable or Change the PIN Number?
Menu > Settings >
•
The PIN code is stored on the USIM card and protects your account against
unwanted use
•
Select On or Off
provided by Telstra but can be changed if required
•
To change the PIN Code select Change Security Codes
•
If you forget the PIN code it can be reset by Telstra.
5.5.2 What is the Handset Code?
Menu > Settings >
•
The Handset Code is stored on the handset and protects against unwanted use. If
the handset is lost or stolen it cannot be switched on without the handset lock code.
This provides a greater level of protection than the PIN code which protects the
USIM card only. The default code is 0000
•
Select On or Off and enter the Handset code, 0000.
•
To change the Handset Code select Change Security Codes and enter a new code of
your choice
•
It is important to remember this code as it cannot be reset once it is lost or forgotten
5.5.3
How to Reset the Handset to Defaults?
Menu > Settings >
If the handset is not working as normal, restore the handset to default factory settings.
The default Handset Lock Code is 0000. User content will not be erased.
► to
Arrow Right
and enter the PIN number to confirm. The original PIN number is
Arrow Right► to
Security
Arrow Right► to Handset Settings
Security > Activate Security Codes
> Activate Security Codes
>
40
> Pin Code
> Handset Code
Restore Default Settings > 0000