How To Connect The Charger - Telstra EasyTouch Discovery User Manual

2.5

How to connect the charger?

Charge before initial use. The charger lead only fits one way. The plug is marked with
an arrow. Always insert the charger lead carefully with the arrow facing the top of the
phone as shown:
Do NOT use excessive force which may damage the USB socket.
Physical damage to the USB port is NOT covered by warranty.
The phone can also be charged by connecting it to a
computer using the USB lead supplied.
Tips about using charging
•
Only use the AC charger and USB lead supplied
•
Insert the charger lead carefully with the arrow facing the top of the phone
•
Do not insert the charger lead at an angle or force it in the wrong way
•
Normal charge time is 3-4 hours. Do not leave on charge for more than 24hrs
•
When not using the phone for long periods remove the battery
•
Charge the battery between 0°C~50°C. Charge the battery promptly when flat.
•
With poor network conditions (less than 2 bars) battery life is reduced
•
To maximize battery life turn off Bluetooth when not in use and limit multimedia
•
The phone can be charged in the ON or OFF state. When the phone is OFF you will
see the Charging Battery screen. When the phone is ON the battery icon will animate
•
If charging in the OFF state turn the phone ON by long pressing the
17
key.