Telstra EasyTouch Discovery User Manual page 51

8.2.1 How to Install the Join Me PC Connection Software
Please install the Join Me CD before connecting the phone to the computer
The following procedures and examples are only applicable to the PC version of Join
Me.
•
Insert the CD provided into the computer
•
The CD will auto-start after a few seconds
•
If auto run does not start then run Setup.exe from the CD
•
The installation shield will launch and guide you through the installation
•
Please follow the prompts to install the software
•
When the installation is complete plug the handset into the computer using the USB
lead supplied
•
The USB lead is unique and should not be used for other devices (it is not the same
as digital camera leads)
• When the handset is plugged in the computer will automatically install the drivers. If
this fails consult our website for more help or access Windows Device Manager to
update the drivers. See www.zte.com.au for instructions.
Note
If the phone is connected to the computer before installing the CD then the drivers will
not be installed correctly
•
Unplug the phone, un-install then re-install Join Me
• See www.zte.com.au for more assistance
51